Showing 1–15 of 62 results
Mazak Leybold Filter
This Retainer Nut holds the nozzle in place on a Contact Profiler Cutting Cut, used on a NTX, STX, and older Mazak Lasers.
These bolts are turned by hand to adjust the nozzle centering.
Mazak Connector Screws 4pcs m2.5×4
This Teflon Cover is mounted above a Mazak Standard Nozzle.
This is the ring the connects to the bottom of the stylus
Mazak Head Screws 4 pcs
It is 89mm (3.56″) long and uses an M8 bolt to attach the Stylus Arm.
This is the black aluminum ring that holds the lower nozzle assembly onto the bottom of the cutting head.
This Brass ring is moved by the adjustment bolts that center the beam in the nozzle.
This copper ring is the bottom piece in the lower section of the Non Contact Cutting Head on a Mark II or NTX.
This Connector Assembly is a fully assembled unit that the Short Sensor Cable (M116S0) threads onto.
This is the ring on the bottom of the cutting head that you push up on to compress the spring.
It is 9mm (.36″) thick, 38mm (1.52″) diameter, and made of brass.
This Stylus Arm is 40mm (1.6″) wide.